Introduction of Build Your Own Cnc Machine 1325 ATC:

This high-speed engraving machine series is a CNC engraving machine driven by Y-axis double motors. Three-axis rack and pinion transmission, it has very good accuracy and cost performance. 

1. The gantry-type high-rigidity structure is adopted; the beam is made of 150*150*8 material to ensure that the aging treatment does not change its shape; 
2. The whole machine is welded with rectangular steel pipes, and is finished after annealing to relieve stress and heat treatment; 
3. The table top is not moving and the gantry is moving. 

Adopt Y-axis dual-motor drive technology:

The use of Y-axis dual-motor dual-drive technology greatly improves the vibration resistance of the three-axis of the machine tool, and the vibration can be reduced by nearly 10 times. Due to the use of dual-motor drive, the skew of the gantry during movement is reduced, the contour processing accuracy is improved, the surface roughness can be reduced by half, and the acceleration of the machine tool axis can also be increased by 20%, which is equivalent to the work efficiency of 3-5 sets of similar equipment. engraved.

Imported linear guides:

1. All three axes are driven by imported linear guide racks;
2. All three axes use imported 25mm linear guides. We only use the best quality linear guides such as HIWIN and Yintai. Although these high-quality parts cost more than other parts, outstanding quality is the only way to achieve the high precision and long life required by users.

Feed drive system:

The feed drive adopts stepping high-speed motor and micro-step subdivision technology, which has high speed and low vibration.

Spindle drive system:

The main shaft is driven by Fuling. Frequency conversion control; high-speed water-cooled frequency conversion main shaft.

1. Adopt high-speed chuck and high-speed nut, suitable for high-speed processing;
2. After strict dynamic balance, it meets the requirements of high speed.

Drag chain system:

The cost of using flexible cables and drag chains is obviously much higher than that of ordinary cables and drag chains. But it can guarantee the reliability of the machine. The machine tool is in motion all the time, and the cable is repeatedly twisted and twisted. It is very easy to break when using ordinary cables, and there will be inexplicable failures, and it is extremely difficult to repair. We use a fully enclosed drag chain system to ensure the absolute safety of the cable.

Vacuum adsorption table performance introduction:

1. The table adopts vacuum adsorption table, the material is hard PVC, high temperature resistance, corrosion resistance, and can strongly absorb materials of different areas.
2. The vacuum adsorption table is divided into 12 areas. “Division according to customer requirements” can be processed in a single area or at the same time to improve processing efficiency.
3. 7.5KW water circulation vacuum pump, high adhesion vacuum adsorption device can reach 400 hours of exhaust. The ultimate vacuum can reach -0.086MPa The user-friendly design of the table top can not only absorb or clamp the workpiece, it is convenient to use

Application of uild Your Own Cnc Machine 1325 ATC:

Buy cnc machine 1325 atc can cut 2D MDF design to make nice table and sofa, and can also cut wood, acrylic, aluminum, ACP,etc all kinds of materials to make interior decoration. Buy cnc machine 1325 atc can also work on wooden doors, cabinets, plate, office and wood furniture, doors and windows, voice box, game cabinets, computer tables, sewing machines table and instruments.